Partners

The Fenix is the first 4-color single-camera optical sorter, entirely made in Italy. It is the most innovative and efficient sorter on the market, offering a cost-effective solution for defect detection in products of similar colors by integrating a standard 4-wavelength multispectral system with RGB and IR on a single 4K sensor. This eliminates the need for separate cameras, reducing costs.

• • 4 wavelengths multispectral system as standard equipment, RGB and IR in the same 4K sensor. This innovative solution allows a completely aligned view. A real improvement detecting defects in similar colours products but with different answers to infrared as foreign bodies, inorganic defects, etc. Furthermore, it allows a considerable cost reduction compared to the market standard with the use of two different cameras.

• • High resolution multispectral cameras SWIR (1024 pixel), up to 4 wavelengths. These cameras allow unreachable results until now, recognising polymers, selecting shells and foreign bodies in dried fruits and where there are chemical differences even if not visible by human eyes.

• • Simultaneous use of RGB, SWIR and IR optical systems: up to 8 frequencies (the standard on the market for these sorters is usually not more than 4 frequencies).
    

• • Flat spectrum led (they reproduce the natural sunlight spectrum).State of the art full spectrum led, without low light areas typical of the standard white led. They allow to detect all the slightest colour shades.

• • State of the art Ev, 3.2mm pitch: with custom design and specification, they can reaches top values in duration and speed. They allow practically to double the number of electrovalves in each chutes. In this way, we increase the production speed, we reduce the quantity of good product wrongly expelled (reject product more concentrated) and allow to reduce the air consumption.

• • RISE-UP system: it allows to move the ejectors close the inspection line; halved distance compared to the other sorters on the market. It reduces the errors due to the different products fall speeds.

• • Multi wavelengths led with focusing lens, it focuses the light only on the right points and it allows to reach high illumination and low consumption.

• • Automatic air pressure regulator: it regulates automatically the pressure of the machine use according to the selected product and it allows to improve the selection, reducing both the quantity of reject and the air consumption.

• • Morphological analysis of the product: it extrapolates the statistical data of the product: average width, average height, percentage of wreckage, etc.

• • System of signals equalization, in order to obtain the same results in each chutes of the machine.

• • Automatic control and equalization of the vibrators speed, in order to have flat and uniform flows in all channels.

• • Dual display 15”: all the useful information for machine monitor, always visible thanks to the two 15’’ touchscreen displays.

• • Easy programming system: the software has been developed in order to create or modify the recipes without the presence of a qualified technician.

• • Smart custom cameras with integrated elaboration and analysis system, hardware and software completely made in Italy.

• • IOT ready, completely compatible with IOT 4.0: it allows the exchange of information related to estimated throughput, estimated reject quantity, number of ejections, morphological product features, etc.

• • Ramps with silver ion treatment for a better smoothness and hygiene.

• • Integrated remote-service system in order to help you in real time, quickly and without on-site intervention costs of a technician, everywhere you are.          

Fenix Mini: the brand new compact optical sorter from 3U Vision, designed specifically for small, exclusive, high value-added
production.

Fenix Mini: Small Scale, Huge Quality

• • A 4 wavelength, multi-spectral system as standard with combined RGB and IR in a single 4K sensor: this innovative feature produces a totally aligned view. This feature is a valuable advantage when detecting defects in similar coloured products which respond differently to infrared, such as foreign bodies, inorganic defects, etc. This single camera is a considerable cost saving when compared to the market standard of requiring two cameras.

• • Flat spectrum LED (to reproduce the natural sunlight spectrum): state of the art full spectrum LED, without the low light areas typical of standard white LED. This makes it possible to detect even the slightest colour variations.

• • 15” widescreens touch display: which continuously display the key information necessary to monitor the machine effectively.

• • Smart, custom designed cameras, comprising hardware and software made in Italy, which incorporate an integrated elaboration and analysis system.

• • Multi wavelength LED with focusing lens: this feature focuses the light only where its desired and achieves high illumination at a low consumption.

• • State of the art ejectors @ 3.2mm pitch: custom designed and specified to achieve maximum sustained velocity while their compact design almost doubles the number of ejector valves in each chute. This feature requires less compressed air yet increases production capacity and reduces the amount of good product being rejected.

• • RISE-UP system: this feature makes the ejector bank adjustable which allows one to locate the ejectors close to the product stream, almost half the distance compared to other sorters on the market. This reduces errors normally caused by the uneven fall speed of the product being sorted.

• • User friendly programming system: the software has been developed so that creating or modifying recipes does not require a qualified technician.
    

• • IOT ready, compatible with IOT 4.0: this enables the exchange of information related to estimated throughput, estimated reject quantity, number of ejections, morphological product features, etc.

• • Integrated Remote-Service system: in order to quickly assist the operator in real time, and avoiding the need for on-site intervention, saving the expense of a technician, regardless of your location.

• • The most compact design in its category, ideal for small-scale high-quality productions, analysis centers, and testing laboratories.

• • Optional support stand with integrated hoppers and pull-out sliding trays.

The most compact design in its category, designed specifically for small, high value-added production.

The Optica contains a 4-wavelength multispectral system with RGB and IR in a single 4K sensor which provides an aligned view for improved defect detection in products of similar colors, offering cost savings by eliminating the need for two separate cameras per chute in comparison to the market standard.

• 4 wavelengths multispectral system as standard equipment, RGB and IR in the same 4K sensor. This innovative solution allows a completely aligned view. A real improvement detecting defects in similar colours products but with different answers to infrared as foreign bodies, inorganic defects, etc. Furthermore, it allows a considerable cost reduction compared to the market standard with the use of two different cameras per chute.
•  
• Flat spectrum led which reproduce the natural sunlight spectrum: state of the art full spectrum led, without low emission frequencies typical of the standard white led. They allow to detect all the slightest colour shades.
  
•  
• SWIR InGaAs additional system available as option.
•  
• State of the art Ev, 3.6 mm pitch: with custom design and specification, can reach top values in duration and speed, practically double the number of ejector valves in each chute. This to increase production speed, reducing the quantity of good products wrongly expelled (reject products more concentrated) and allowing to reduce air consumption.
•  
• RISE-UP system: it allows to move the ejectors closer to the inspection point of the cameras; halved distance compared to the other sorters on the market. It reduces errors due to different products’ fall speeds.
•  
• Multi wavelengths led with focusing lens, it focuses the light only on the right points and allows high illumination and low consumption.
•  
• Self-regulation and equalization of the flow rates, to have constant and equal flows in all chutes.
•  
• System of signals equalization, to obtain the same results in each chute of the machine.
•  
• IOT ready, completely compatible with IOT 4.0: it allows the exchange of information related to estimated throughput, estimated reject quantity, number of ejections, morphological product features, etc.
• 
• Easy programming system: the software has been developed to create or modify recipes without the presence of a qualified technician.
•  
• Smart custom cameras with integrated processing and analysis system, hardware and software, completely made in Italy.
•  
• Ramps with silver ion treatment for a better smoothness and hygiene.
•  
• Integrated remote-service system in order to help the customer in real time, quickly and without on-site intervention costs of a technician.
•  

 The Optica contains a 4-wavelength multispectral system with RGB and IR in a single 4K sensor which provides an aligned view for improved defect detection in products of similar colors, offering cost savings by eliminating the need for two separate cameras per chute in comparison to the market standard.

• 4-wavelength multi-spectral system combining RGB and IR in a single 4K sensor ensures a perfectly aligned view. Ideal for detecting similarly colored products reacting differently to infrared (e.g., foreign bodies, inorganic defects), it also saves costs compared to the market standard of using two cameras.
•  
• 15” widescreen touch display providing continuous key information for effective machine monitoring.
•  
• Smart, custom-designed cameras with Italian-made hardware and software, featuring an integrated processing and analysis system.

• Multi wavelength LED with focusing lens: this feature focuses the light only where its desired and achieves high illumination at a low consumption.

• RISE-UP system: an adjustable ejector bank positions ejectors closer to the product stream, halving the distance compared to other sorters and reducing errors from uneven product fall speeds.

• State-of-the-art 4.8mm pitch ejectors are custom-designed for maximum velocity, nearly doubling the number of valves per chute. This compact design uses less compressed air, boosts production capacity, and minimizes good product rejection.

• User friendly programming: the software allows recipe creation or modification without the need for a qualified technician.

• IOT-ready and Industry 4.0 compatible: enables data exchange on estimated throughput, reject quantity, ejections, and product morphological features.

• Integrated Remote-Service system: provides real-time operator assistance, eliminating on-site interventions and technician expenses, no matter your location.

• The most compact design in its category, ideal for small-scale high-quality productions, analysis centers, and testing laboratories.

• Optional support stand with integrated hoppers and pull-out sliding trays.

The Hyperion is a 4-wavelength multi-spectral system that integrates RGB and IR in a single 4K sensor, ensuring precise detection of defects in similarly colored products, leading to significant cost savings over a two-camera setup. Optional front and rear hyperspectral cameras enhance selection quality further.

• A 4 wavelength, multi-spectral system as standard with combined RGB and IR in a single 4K sensor: This innovative feature produces a totally aligned view. This feature is a valuable advantage when detecting defects in similar coloured products which respond differently to infrared, such as foreign bodies, inorganic defects, etc. This single camera is a considerable cost saving when compared to the market standard of requiring two cameras.
•  
• New front and rear hyperspectral cameras: optional, for a selection quality never achieved before.
•  
• High resolution, multispectral, 4 wavelength cameras SWIR (1024 pixel): These cameras achieve previously unattainable results in the recognizing of polymers, selecting of shell and foreign bodies in dried fruits, and also in detecting chemical differences not visible to the human eye.
•  
• Simultaneous use of RGB, SWIR and IR optical systems: Having up to 8 frequencies available, while the market standard for this type of sorter is normally no more than 4 frequencies.
•  
• Flat spectrum LED (to reproduce the natural sunlight spectrum): State of the art full spectrum LED, without the low light areas typical of standard white LED. This makes it possible to detect even the slightest colour variations.

• 

• Dual 15” displays: Two 15” touch screens, which continuously display the key information necessary to monitor the machine effectively.
•  
• Smart, custom designed cameras, comprising hardware and software made in Italy, which incorporate an integrated elaboration and analysis system.
•  
• State of the art ejectors @ 3.2mm pitch: Custom designed and specified to achieve maximum sustained velocity while their compact design almost doubles the number of ejector valves in each chute. This feature requires less compressed air yet increases production capacity and reduces the amount of good product being rejected.
•  
• RISE-UP system: This feature makes the ejector bank adjustable which allows one to locate the ejectors close to the product stream, almost half the distance compared to other sorters on the market. This reduces errors normally caused by the uneven fall speed of the product being sorted.
•  
• Multi wavelength LED with focusing lens: This feature focuses the light only where its desired and achieves high illumination at a low consumption.

• 

• Automatic air pressure regulator: The regulator automatically adjusts the pressure in the machine based on the product selected. This allows the operator to adjust the air consumption accurately to minimize good product being rejected.
•  
• Morphological analysis of the product: Extrapolating statistics of products such as average width, average height, percentage of wreckage, etc.
•  
• Automatic control and equalization of vibrator speed: Necessary to obtain a deep and uniform stream of product in all the channels.
•  
• User friendly programming system: The software has been developed so that creating or modifying recipes does not require a qualified technician.
•  
• IOT ready, totally compatible with IOT 4.0: This enables the exchange of information related to estimated throughput, estimated reject quantity, number of ejections, morphological product features, etc.
•  
• Integrated Remote-Service system: In order to quickly assist the operator in real time, and avoiding the need for on-site intervention, saving the expense of a technician, regardless of your location.

• 

• Full accessibility: easily removable transparent polycarbonate side panels for quick inspection, cleaning and maintenance.
•  
• Multifunctional frame: made of painted metal or stainless steel suitable for all the most demanding and critical applications.
•  
• Modular configurations: allow the combined installation of different optical systems, both on front and on back to of the chute to suit all requirements.
•  
• Optional metal-detector operating simultaneously with the optical sorting.
•  
• Feeding system optimized for each specific product.